The next step will be to connect two (EUR) upright posts together with two (DRS) end supports. To do this, you’re going to need two people. One person will stand holding one EUR upright post in each hand. The other person will start by inserting one side of the DRS end support into the slots at the bottom of one of the EUR upright posts. Then, they will do the same with the other side of the DRS end support and other upright post. After that, they will repeat the process at the top of the upright posts. At this point, one end of the shelving system will be complete. The entire process will then be repeated with the other end of the shelving.
The third step in the Tennsco shelving assembly process will be to connect the two ends of the shelving system with your left-to-right shelf supports. This step is similar to the first step; simply line up the end of the shelf support at the same height on the upright post as the end support to ensure an even shelf. Then, do the same with the other left-to-right shelf support. At this point, each left-to right shelf support will be connected to one end of the shelving. After this, you’ll want to do the same at the other end, so you’ll have the frame ready for your bottom shelf level.
Repeat the previous steps with the top shelving level to stabilize the unity, and then with the remaining shelving level. After that, place the shelving boards on the level.
Just as simple as that, you’re done! We hope this video has effectively taught you how to assemble Tennsco low profile shelving. To see our full inventory of shelving, pallet rack, and custom warehouse services, check us out at akequipment.com.
AK Material Handling Systems has the experience and professionalism to help you with whatever storage needs you might have. Let us prove it to you – give us a call at 800-722-5908, or send us an email at [email protected]. We look forward to hearing from you!